B. List of Tools
Section B. List Of Tools
- 1--100-foot Tape measure (minimum length)
- 1--16-foot Steel tape measure
- 1--20-ounce Claw hammer with steel handle
- 1--Centerpunch
- 1--Countersink
- 1--Set of Screwdrivers (2 Phillips and 2 standard)
- 1--Pair of pliers/channel locks (6-inch or greater)
- 1--Chalk line and chalk
- 1--Dry line
- 1--Pop rivet gun
- 1--Awl
- 1--Drill bit set, 1/8-inch to ½ inch
- 1--Putty knife, 3 inches wide
- 5--Drill bits, 9/64-inch
- 1--Utility knife
- 1--Pair tin shears, good quality
- 1--Set hole saws for various grommet sizes
- 1--Double-cup suction panel lifter
- 1--Level loop carpet panel lifter
- 1--Set of 4 carpet shoes
- Marking pencils
- Safety glasses
- Rasp and metal file
- Work gloves
- Screwgun tip bits--standard and Phillips No.2
1. Handbox includes:
- 1--Builder’s Transit or laser level
- 1--2-foot Hand level
- 1--Power drill, 3/8-inch
- 1--Power drill, ½-inch
- 1--Adjustable hammer drill, ½-inch
- 1--Powder actuator (Hilti DX 350 or equivalent)
- 1--Set powder actuated pins & shots
- 1--Bayonet saw and blades (Rockwell Model 548 or equivalent)
- 1--14-inch metal-cutting bandsaw (Rockwell Model 28-300 or Powermatick Model 143 or equivalent)
- 1--25-inch Pallet Jack (Stratton or equivalent)
- 1--Leveling Bar
- 1--Adjustable torque-limiting screwdriver
- 1--Adjustable torque-limiting screwgun
- 6--Bandsaw blades: bi-metal
- 14-tooth
- ½-inch wide, .034-inch thick
- 2--Extension cords, 50-foot
- 2--Extension cords, 100-foot
2. Other Tools (Optional):
CAUTION: Adequately protect the A/F when moving gang boxes and bandsaws across finished surface.