USED Bare ConCore® Cornerlock Raised Floor System

$5.45
per square foot
Quick Overview

Complete access floor kit includes Tate ConCore concrete filled steel panels with no surface covering. Includes 24” x 24” panels, adjustable posilock/cornerlock pedestals, screws and pedestal adhesive.  Panels and pedestal bases will have residual adhesive from previous installation. Sold by the square foot in 4’ increments. This floor height is 6". For heights below or above 6" please contact us with your requirements as a minimum charge will apply.

Additional Information
Model AFSUCB
Notes In Stock

Panels and pedestals create a raised floor. It is as simple as that. We offer a previously owned bare steel heavy duty panel, factory filled with concrete in an easy to install DIY kit. This raised floor kit can be used in variety of applications, from offices, exhibit booths, trade show platforms, and retail platforms. Also, the way the components fit together makes installation easier for the first timer, or for the most experienced. This kit is based on ConCore® Panels manufactured by TATE® and is available by the square foot, in 4' increments.

The panels in this kit have no surface covering, they are bare steel. They have residual glue on them which makes these these panels perfect for carpet applications and a wide variety of other hard surfaces. We have a complete line of ESD surface coverings.

These panels are rated at 1000 lbs. per square inch.

These panels are constructed to screw into the pedestals, creating a rigid system. The kit price includes the adhesive that holds the bases to the sub-floor, the pedestal assemblies consisting of an all steel base and adjustable head (1" up and 1" down), the panels, and cornerlock screws which fasten the panels. 

Minimum Purchase of 152 Square Feet. Price is per square foot. Freight and Installation not included. Installation instructions are online for your convenience.  The price shown is for orders over 100 panels (400 sf). Please contact us for a quote on orders under 400 square feet.

This floor height is 6". For heights below or above 6" please contact us with your requirements as a minimum charge will apply.

Subject to prior sale.

 

 

By purchasing and installing this floor, the purchaser assumes all liability of complying with federal, state and local building code compliance, fire prevention, ADA Accessibility and Seismic Bracing or any other building code requirement enforced in a customer’s local area. This includes, but is not limited to Reservations, Parishes and County Jurisdictions.