8 inch Grommet | Cable Organization w Swivel Lid
- Buy 10 for $24.13 each and save 5%
Snap-in swivel lid allows for partial opening or full opening. Consists of an outer flange and a two part insert . 4 cable openings in the lid are 1 1/4" x 1 1/4". An 8 3/16" hole is needed for installation, internal cable opening size is 7 3/4". This grommet is 1 1/2" deep. Color: Black Mount with 2 screws. Screws sold separately.
Grommets are sleeves which are installed into raised floor panels. They protect cables from being cut by the sharp edges created after cutting into a panel for wire access. In addition, they protect employee fingers from sharp panel edges.
Grommets are made from injected molded plastic resins designed for long-lasting wear and are resistant to chipping or breakage. They have a snap-in swivel lid that accommodates cables.
An 8 3/16" hole is needed for installation, and the internal cable opening size is 7 3/4". This grommet is 1 1/2" deep for full protection from the cut raised floor panel. It is manufactured from flame retardant A.B.S. resin, a strong durable plastic material. This grommet has a two piece snap-in swivel lid which allows for partial opening or full opening with the lid in place. The 4 cable openings in the lid are 1 1/4" x 1 1/4". The inside lid swivels to allow for all four openings to be exposed as required or for a partial or complete seal with no openings.
Remember a hole saw is required to cut the opening in a floor panel when using circular grommets. For added stability, there are 2 screw holes in the grommet base which allow for mounting. Screws are not provided.