STEP 6. Glue each pedestal base in the spread area to the subfloor. Using a spatula type device, tilt up base plate without changing its location and apply adhesive to bottom of base plate.

NOTE: When using fasteners to anchor pedestal bases, each base should be glued and stringers installed (if part of system) before installing anchors. The type of fasteners used may also require that panels be installed for later removal and installation of fasteners. This ensures pedestal location and plumbness when anchored. Caution should be taken to insure that an adequate amount of adhesive is used, especially if project specification require specific overturn movements on base plate.

Step 7. Bolt Stringers