Cable Tray Estimator
Cable Tray Kit
As long as your raised floor is a standard 2' x 2', 6" in height or over, and has support pedestals, this system will work. Just pick up a 2' sectional row of your existing panels. Simply slip on vertical supports to your pedestals, drop in horizontal supports on those vertical supports, and then drop in a 2' square x 2" tall cable tray. Once the tray is in place, simply clip a grounding clip to it and you are finished! It is just that simple.
This system is a continuous, rigid, welded steel wire mesh cable management system for access or raised floor applications. It is smartly designed to work with vertical and horizontal supports using your raised floor understructure which independently support the tray sections. Standard finish is pre-galvanized to avoid formation of zinc whiskers in the raised floor environment. It is wire mesh welded at all intersections. Wire Diameter: 0.197 inch (5mm) minimum on all mesh sections.
Each section is 24" x 24" x 2".
Length
We will figure all the cable tray components needed based on the total length you provide us. Simply give us the total linear foot of your cable tray design. For example if your room is 20 x 20, and underneath you have a cross pattern one section being 24 feet and the other 18 feet, then tell us you need 42 feet of cable tray.
This cable tray system is perfect for installing under new or existing raised floor. It’s very easy to self -install. This system is a continuous, rigid, welded steel wire mesh cable management system for access or raised floor applications. It is smartly designed to work with vertical and horizontal supports using your raised floor understructure which independently support the tray sections. Standard finish is pre-galvanized to avoid formation of zinc whiskers in the raised floor environment. It is wire mesh welded at all intersections. Wire Diameter: 0.197 inch (5mm) minimum on all mesh sections.
Turns
A special type of tray that does not have wire mesh sides is used wherever your cable tray makes a 90 degree turn. Tell us how many times you have a turn in your linear tray layout and we will figure that in. Do not deduct these sections from your linear feet total, this program does that for you. Each section is 24" x 24".
Freight
All of our prices are quoted fob Covington Louisiana. This means that freight is not included in our material prices. They are based on total weight and your zip code.
Depending upon your individual job site requirements, the following services might be required if you do not have a loading dock at your facility:
Inside delivery: This includes the services of a delivery team to bring the freight to your room. This is elevator only service with a pallet jack and they will not bring material up or down stairs.Lift Gate: If your location does not have a loading dock or a forklift you will require a lift gate service by the delivery company to remove the materials from the truck bed.