EnviroTec Pedestal Adhesive

(per gallon)
Quick Overview

Solvent-free, formulated for adhering access floor bases to concrete or to a steel subfloor. One gallon will cover approximately 400 square feet. A utility grade pedestal adhesive that meets the CISCA overturning moment test.  

Additional Information
Model EVTC
Notes In Stock

Envirotec 105 Pedestal Adhesive is specifically designed for the installation of metal pedestals to concrete floors. Coverage will vary with pedestal size.


  • High Performance Adhesive
  • VOC Compliant
  • Freeze Thaw Stable
  • Bonds Metal to Concrete
  • Easy Application and Clean Up
  • Solvent Free
  • VOC's 6 g/L


Surfaces to which pedestals are to be bonded must be clean, dry, free of dust, dirt, paint, oils, wax and any other foreign matter. Apply adhesive to pedestal by the method normally used by a professional installer of access flooring. Full coverage of the pedestal is recommended with adhesive exuding from the pedestal base perimeter. Keep container sealed when not in use. Clean up with warm water while adhesive is still wet.

Curing Time

Cure time is a measure of the time required for the adhesive to reach maximum strength. The cure time can affect the project installation time, especially if an on-site CISCA overturning moment testing is required.

Envirotec 105 needs to allow for moisture to evaporate in order to cure.  If you need a faster cure time, we recommend SealBond 95.

  SealBond 95 Envirotec 105
Typical Cure Time: 10 days 45 days